Netgear WiFi Extender

My Netgear WiFi Extender Won’t Stay Connected? What Should I Do?

In order to provide a reliable WiFi connection all the time, Netgear WiFi extender is supposed to be connected to the internet. But, if there are fluctuations, things become a little impossible. Just in case you are facing similar kinds of problems, you should, without any delay, give a read to this post. Here, you will learn different ways to fix the problem. Prior to getting started, we wish to inform you that implementing one or two hacks will require accessing the URL. Thus, you should be ready for the same.

Resolved: Netgear WiFi Extender Won’t Stay Connected

There are times when a technical glitch impacts the extender’s ability to such an extent that it fails to stay connected to the internet consistently. Perhaps, the same is the case with you. Thus, we recommend you restarting the WiFi extender before trying any hack. This will give a fresh start to the extender and fix technical glitches as well. After restarting the extender, if the problem persists, you are free to try the below tips:

1. Check the Router-Extender Gap:

The gap between your Netgear wifi extender and the main router is of utmost importance if they are communicating wirelessly. If you are facing continuous disconnections, then its reason might be a large gap between the extender and router. Therefore, it is recommended to reduce this gap.

Note: While decreasing the distance between your extender and router, make sure that you do not make it zero. Otherwise, the signals emitted by both devices will clash.

2. Update the Firmware of Netgear WiFi Extender:

Every networking device deserves to be updated. Perhaps, you were ignoring a pending firmware update due to which your Netgear extender ditched you with a connectivity issue. Therefore, you are suggested to access or mywifiext.local in accordance to the OS of your PC and check if your range extender really needs an update. In case, it does, you are suggested to update the firmware quickly. However, you should carry out the firmware update process with the help of a wired connection between PC and extender.

3. Disconnect a Few Devices:

Heavy network traffic can also be the reason why your extender is struggling to stay connected all the time. Reducing a number of devices connected to its network may work. So, do what is needed. Connect only those devices on which an internet connection is crucial. If necessary and possible, use a hardwired connection between the extender and clients.

4. Restart the Entire Network:

Perhaps, the problem is not with your Netgear wifi extender, but, with an anonymous device present in the home network. Since you cannot identify that device quickly, a power cycle of the entire network might work. Thus, power down every device in the home network and wait for a few minutes. Lastly, switch on all of them see if connectivity issues are still there.

5. Check the Netgear WiFi Extender’s Placement:

One of the most overlooked factors with respect to the performance of a Netgear extender is its placement. May be your extender is sitting in a room filled with signal interference due to which connectivity issues persist. To get rid of signal interference, you are suggested to change the location of your Netgear extender. Be sure that you keep it away from microwave ovens, televisions, refrigerators, aquariums, etc. If possible, reflexive surfaces must also be considered and your extender must be kept far from them.

The Conclusion

The extender facing connectivity issues is not a new thing today. There can be a lot of reasons behind this. If even after trying all the given solutions, your extender is bugging you, then know that the time to perform a factory default reset has come. To do that, you need to press and hold the Reset button present on its back. After that, set it up once again.

Read More- What is Linksys Interface and Features to Explore?


Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *